![]() |
Technics direct drive turntables
"Bob Latham" wrote in message
In article , Jim Lesurf wrote: In article , Arny Krueger wrote: "Bob Latham" wrote in message Baring in mind they are of a similar basic design and that the Linn has had nearly 40 years of tweaking/tuning. What would need to be tweaked, and how do you know for sure that Linn properly identified and addressed them. The "tweaking/tuning" could perhaps also be classified as "still-trying-to-fix-some-of-the-flaws / flogging-changes-to-keep-up-cashflow / magic-passes-for-the-indoctrinated". :-) I have not kept up with upgrades and have not purchased anything for my Linn except replacement lid hinges in what must be 25 years. The last thing I got was a bonded sub chassis which replaced the welded one. But I do know there have been at least two electronic speed/ motor controllers and a new base board with vibration absorbing feet and most probably a host of other things. Sounds to me like the origional design was defective or at best suboptimal compared to prior art. None of those things represent technology that was not well-known when the TD125 was first produced. If memory serves, both the AR turntable and the TD125 had robust die cast sub-chassis which would be the way to go. Welded up = minimal tooling costs. |
Technics direct drive turntables
In article ,
Bob Latham wrote: In article , Jim Lesurf wrote: I think your contempt for Linn is taking you past cynical and into spiteful. I think you are playing the "Go for the man, not the ball" stroke. :-) In your last post you appeared to looking very hard to find things to attack and then putting the worst possible interpretation on each point. Then we get "twang their elastic bands". I think you've been watching too much 'Strictly' and it has made spiteful bitching acceptable to you. Your hatred of Linn is an order of magnitude greater than my liking for the the LP12 ever was. You are still attacking me rather than dealing with the points I made about the LP12. Also you do seem to be slipping into 'mindreading' with your assertions about my 'hatred' sic of Linn. FWIW I think that IT was a very successful businessman who did a good job of building a manufacturing firm and bringing jobs to his local area. Good on him for that. Not been easy in recent decades to make a success of manufacturing in the UK. And I think various of their other products are fine. Also happy to buy their CDs. Even recommend their internet 320k radio streams for anyone who is interested. Sorry if all that clashes with your belief that I 'hate' Linn. Slainte, Jim -- Please use the address on the audiomisc page if you wish to email me. Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html Audio Misc http://www.audiomisc.co.uk/index.html |
Technics direct drive turntables
"Bob Latham" wrote in message
In article , Arny Krueger wrote: Sounds to me like the origional design was defective or at best suboptimal compared to prior art. None of those things represent technology that was not well-known when the TD125 was first produced. If memory serves, both the AR turntable and the TD125 had robust die cast sub-chassis which would be the way to go. Welded up = minimal tooling costs. Yes of course, whatever you say, not biased at all are you. Of course I'm biased, but I'm also experienced and whatever I say, I know someone well who will lovingly inform me even more about it at much as I can stand. Detroit is a manufacturing town, has been for over a century, and still is. If you find the idea that welded-up assemblies are in this case a cheap approximation to be controversial, then you are too far gone into the land of Linn nirvana to bother with. |
Technics direct drive turntables
"Bob Latham" wrote in message ... In article , Jim Lesurf wrote: I think your contempt for Linn is taking you past cynical and into spiteful. I think you are playing the "Go for the man, not the ball" stroke. :-) In your last post you appeared to looking very hard to find things to attack and then putting the worst possible interpretation on each point. Then we get "twang their elastic bands". I think you've been watching too much 'Strictly' and it has made spiteful bitching acceptable to you. Your hatred of Linn is an order of magnitude greater than my liking for the the LP12 ever was. I'm no particular fan of Linn products (they are/have always been too expensive for me to even consider) but it has always struck me as odd that 'Linn haters' are always a lot more ferocious than fans of that particular product line...?? |
Technics direct drive turntables
"Keith G" wrote
I'm no particular fan of Linn products (they are/have always been too expensive for me to even consider) but it has always struck me as odd that 'Linn haters' are always a lot more ferocious than fans of that particular product line...?? Fans are rarely "ferocious"! But I remember when the Linn turntable first came out the adulation from certain quarters was bizarrely over the top. It seems to me that the OTT praise of the Linn, always phrased in entirely subjective terms opened the flood gates for the "subjectivist" school of HiFi reviewing, in which objective facts were dismissed as irrelevant, whilst the reviewers personal opinion, expressed in purely subjective terms and often displaying real technical ignorance, was elevated to the status of "holy writ". I stopped buying HiFi magazines because of this shift in reviwing style, so I can probably thank the Linn turnatable for saving me a lot of money over the years. If a few people are prepared to criticise these sacred cows that's no bad thing IMO. David. |
Technics direct drive turntables
In article , David Looser
wrote: I stopped buying HiFi magazines because of this shift in reviwing style, so I can probably thank the Linn turnatable for saving me a lot of money over the years. I thought for a second you'd left the "f" out of "shift" there... ;- If a few people are prepared to criticise these sacred cows that's no bad thing IMO. Well, I didn't really criticise the LP12 in terms of being able to rotate an LP. So far as that was concened the audible problems I recall seemed to be due to the asak cartridge. Not the actual TT or arm. Although I guess it was the case back then that this was part of the 'magic system' that many UK writers and dealers regarded as if on a plane above all else. What seemed odd to me was that despite the claims about it being so good, that bits tended to drop off, it apparently needed 'adjusting' every now and then, and there has been a stream of 'upgrades'. Yet other equipment like the Technics (to drag this back on-topic) didn't seem to require all the fuss and added costs later on. If I have any real criticisms they are of the 'flock' of flat-earth dealers and writers who dismissed many alternatives. And in the process may have lost us a number of good designs and makers that may have better and cheaper so far as many end-users were concerned - if they'd had a chance to listen to them on a more open-minded basis. I can understand the dealers though if what various of them have told me was true. A 40 percent markup on a product that people come in *expecting* to buy because of what they'd read from 'experts', plus having an area quasi-monopoly must have seemed a good business. Why kick the sacred cow that gives you milk? Just sell the milk the customers come in ask for. :-) Slainte, Jim -- Please use the address on the audiomisc page if you wish to email me. Electronics http://www.st-and.ac.uk/~www_pa/Scot...o/electron.htm Armstrong Audio http://www.audiomisc.co.uk/Armstrong/armstrong.html Audio Misc http://www.audiomisc.co.uk/index.html |
Technics direct drive turntables
"Jim Lesurf" wrote in message ...
...by which I mean those who droned on about Pace Rhythm And Timing, of course. ;- I thought the band did that... |
Technics direct drive turntables
"Wally" wrote in message ... "Jim Lesurf" wrote in message ... ...by which I mean those who droned on about Pace Rhythm And Timing, of course. ;- I thought the band did that... Hi Wally - long time no see! :-) |
Technics direct drive turntables
"David Looser" wrote in message ... "Keith G" wrote I'm no particular fan of Linn products (they are/have always been too expensive for me to even consider) but it has always struck me as odd that 'Linn haters' are always a lot more ferocious than fans of that particular product line...?? Fans are rarely "ferocious"! But I remember when the Linn turntable first came out the adulation from certain quarters was bizarrely over the top. OK, I wasn't particularly into 'audio' those days and although I had hifi kit and played a lot of records I never bought hifi magazines, so I didn't get to see the 'early Linn'...!! It seems to me that the OTT praise of the Linn, always phrased in entirely subjective terms opened the flood gates for the "subjectivist" school of HiFi reviewing, in which objective facts were dismissed as irrelevant, whilst the reviewers personal opinion, expressed in purely subjective terms and often displaying real technical ignorance, was elevated to the status of "holy writ". I stopped buying HiFi magazines because of this shift in reviwing style, so I can probably thank the Linn turnatable for saving me a lot of money over the years. I share your view entirely and realised that I could get a lot of really nice charity shop vinyl for the price of a mag (last 5 years or so) which was full of meaningless 'purple prose' from a few 'journos' using the buzzwords/phrases of the day to describe their own experiences with kit I'll never see, let alone hear. This'll make you laff: I sold an unusual record player to someone a year or so ago and he came to collect it all in a hurry (long journey). He spotted my World Audio Design valve amp and phono stages and said 'Oh, do you read HFW?' I said 'No, I gave those up as a waste of time and money some time ago!' (or words to that effect). Turns out he was/still is one of the editorial team and regular contributor to HFW!! Oops! :-) If a few people are prepared to criticise these sacred cows that's no bad thing IMO. Sure, but a few go way beyond 'criticism' when it comes to Linn and Bose products - as well as with the better known snake oil merchants that are frequently mentioned here! |
Technics direct drive turntables
"Keith G" wrote
Sure, but a few go way beyond 'criticism' when it comes to Linn and Bose products - as well as with the better known snake oil merchants that are frequently mentioned here! Well I guess that products that acquire the lavish praise that Linn and Bose have received will tens to attract "lavish" criticism as well. In the case here Jim has made his view of the Linn turntable very clear, but his criticisms were specific, he didn't merely dismiss the Linn as "rubbish". And it seems to me that Bob's reaction to Jim's criticism was at least as "ferocious" as Jim's criticism had been. For myself I have no feelings about the Linn either way. I've no experience of the actual turntable, only of the bizarrely OTT praise of it that brought my buying of HiFi mags to an end. From the actual descriptions of it that I saw (as distinct from the far more common "purple prose") it appeared to be very little different from my Thorens TD150, so I could see no reason why it should sound any better. These days I use a Luxman DD turntable. It claims to be an "ultimate HiFi component", so it must be better than any other turntable, mustn't it? :-) David. |
All times are GMT. The time now is 07:05 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.0.0
Copyright ©2004-2006 AudioBanter.co.uk