Hmmm!
 

"Iain Churches" wrote in message
ti.fi...

"Arny Krueger" wrote in message
. ..

"Iain Churches" wrote in message
ti.fi...

"Eiron" wrote in message
...

It's a very old idea and still as pointless as ever
unless the point is to fleece audiophools.

Yes. I had a feeling he had not invented something
new. But he certainly does seem to have found
a market niche.

Some of us have these ethics thingies that keep us from perpetrating
scams like that.

Come on Arny. Don't come over all sanctimonious on us.
If someone offered you USD100 an hr for making up cables,
you would not be able to get you fat little pensioners' legs under
the bench fast enough! And you know it:-)

I've turned down more lucrative deals on the same grounds.

As far as fat pensioner's legs go, I'm not a pensioner, and my legs are
pretty trim.

Externalizing again, Iain?

Hmmm!
 

"Arny Krueger"
"Iain Cherchus ****ing Criminal "


Isn't "HighEnd Speaker Cable" synonymous with "Scam"?

No doubt right down your alley, Iain.

It was based upon some thick twin co-axial with
two separate shields. He had then connected
the screen of the left wire to the inner of the right
wire, and the inner of the left wire to the screen
of the right wire.

Since each cable has two screens, and which screen to use is not stated,
the instructions are gibberish. So is the engineering.


** What Cherchus wrote is gibberish - as usual.

The allusion to twin ( ie figure 8 ) shielded audio cable - as used for
RCA leads.

NOT twin shielded RF co-ax.




........ Phil

Iain Cherchus = Total LIAR
 

"Iain Cherchus = Total LIAR "


Come on Arny. Don't come over all sanctimonious on us.
If someone offered you USD100 an hr for making up cables,
you would not be able to get you fat little pensioners' legs under
the bench fast enough! And you know it:-)


** Whenever the smirking Cherchus criminal psychopath ends a para
with a smiley - it means the cretin has just posted yet another

TOTAL BLOODY FABRICATION




....... Phil

Hmmm!
 

"Iain Churches Lying Criminal "

The initial order is for 600metres. Go count:-)


** Whenever the smirking Cherchus criminal psychopath ends a para
with a smiley - it means the cretin has just posted yet another

TOTAL BLOODY FABRICATION





....... Phil

Hmmm!
 

Iain Churches wrote:

I talked on the phone with a chap today who
told me he had a very good idea for a high-end
loudspeaker cable.

It was based upon some thick twin co-axial with
two separate shields. He had then connected
the screen of the left wire to the inner of the right
wire, and the inner of the left wire to the screen
of the right wire.

What exactly did he imagine this achieved ?

Graham

Hmmm!
 

"Eeyore" wrote in message
...


Iain Churches wrote:

I talked on the phone with a chap today who
told me he had a very good idea for a high-end
loudspeaker cable.

It was based upon some thick twin co-axial with
two separate shields. He had then connected
the screen of the left wire to the inner of the right
wire, and the inner of the left wire to the screen
of the right wire.

What exactly did he imagine this achieved ?

A way to separate fools from money.

Hmmm!
 

I think this may be the design he was talking about.

http://www.tnt-audio.com/clinica/ubyte2e.html


Dezza.

Iain Cherchus = Total LIAR
 

"Phil Allison" wrote in message
...
:
:
: "Iain Cherchus = Total LIAR "
:
:
: Come on Arny. Don't come over all sanctimonious on us.
: If someone offered you USD100 an hr for making up
cables,
: you would not be able to get you fat little pensioners'
legs under
: the bench fast enough! And you know it:-)
:
:
: ** Whenever the smirking Cherchus criminal psychopath ends
a para
: with a smiley - it means the cretin has just posted yet
another
:
: TOTAL BLOODY FABRICATION
:
:
:
:
: ...... Phil
:
Come on Philthy, you dream of being able to make a $100/hr.
The green eyed jealously monster is coming out in you again.

TT

Hmmm!
 

"Arny Krueger" wrote in message
. ..
:
: "Eeyore" wrote in
message
: ...
:
:
: Iain Churches wrote:
:
: I talked on the phone with a chap today who
: told me he had a very good idea for a high-end
: loudspeaker cable.
:
: It was based upon some thick twin co-axial with
: two separate shields. He had then connected
: the screen of the left wire to the inner of the right
: wire, and the inner of the left wire to the screen
: of the right wire.
:
: What exactly did he imagine this achieved ?
:
: A way to separate fools from money.
:
I'm just annoyed that I can't do something like this!
:-( Something totally legal (though un-ethical) and such
an easy way to make money. Sighhhhh......................

Hey, I know, what about I construct a computer program for
sale over the internet? DST - Double Sighted Test. I could
have lots of flashing lights, sounds that go "Bing" and it
allows the user to predetermine the desired outcome. Or
better still, a scanner program that analyses the colour and
thickness of cables and gives a printout of their abilities
in a sighted test so you don't even have to hook them up if
you don't want?

I could be onto somethin' eh Arny?

Cheers TT

Hmmm!
 

"Eeyore" wrote in message
...


Iain Churches wrote:

I talked on the phone with a chap today who
told me he had a very good idea for a high-end
loudspeaker cable.

It was based upon some thick twin co-axial with
two separate shields. He had then connected
the screen of the left wire to the inner of the right
wire, and the inner of the left wire to the screen
of the right wire.

What exactly did he imagine this achieved ?

I have no idea. It seems, like Eiron said, that this
is nothing new, but like most things, gas been tried
before. I understand thereare also companies in
Italy who make speaker cable exactly in this way.

Iain