Hey folks, Can anyone help me with the pinout for a Grundig MCD46 cd-changer. This has an 8-pin DIN connector and is common on many Fiats e.g. Brava, Bravo, Marea, etc. Trying to make my own lead up you see...any help appreciated. Tim

I want to put my blaupunkt woodstock DAB52 into my clio, but i want to use the remote stalk and then standard CD changer that came with my clio. Can this be done? Stuart

I have fitted a Skoda symphony head unit and Skoda cd unit in my car. The lead stayed in the old car so I made one up myself. The input into the head unit from the cd player now appears to strong and is clipping. Are there any attenuators in the original lead or how can I solve the problem Thanks Doug

Hi, I have a Focal Polyglass 165V2 speaker set, which also contains Focal TN47 tweetwers. Recently I have noticed some funny behaviour, which looked like cable problem at first. It all started when left tweeter shut up, but came back after a while. Some time later both of them shut up again and remained dead long enough, so I finally found some time to pull them out and check with

Hi, Has anyone installed some of Pioneer's MP3CD players to Megane II with head up display? If so, what information is shown on that head up display? ID3tags? Thanks for help PeeJii

Anyone know which radio model/s was supplied to a 1991 Nissan Sunny 5 door hatchback. Was it any good? if so, are there any still available?. I notice that the 2 front door speakers(none at rear) are Clarion. just sid.

I'm looking at buying a generation 4 Prelude Si-VTEC import (1991-1996) I know that the VTEC models had a funky audio system with something active feedback on the rear speakers, and an amplified 6x9 centre speaker in the rear too. I've also seen on some US sites, the option of an adaptor to change the Honda Loom to a standard ISO fitment. Does that make all the speakers continue working as...

As above- got one of these coming in for abit of a refit, any idea what speaker size is fitted as standard. Its a 98 TDL-SE. Tim..

Evening All, I'm currently trying to install a set of 13cm speaker as a replacement for the door speakers on my '91 Eunos Roadster (Japanese-Market Mazda MX-5). Trouble is, the original Mazda Speakers have an aperture of 14cm so I've got a lot of air that I can currently bolt the new speakers to :-/. And that's without mentioning Mazda's weird 3-hole mounting pattern. I've seen adapter plates...

Hey guys, I've got two line-level outputs (my MP3 player and my GPS system) that I would like to be able to both output to the amplifier simultaneously (so that the GPS speech will be audible over the music). What's the best way to do this in a car environment? I'm guessing simply plugging them both into the amp using a splitter is going to turn the amp into an expensive paperweight?

I have a standard renault ICE setup and want to add DAB to it. I have the blaupunkt DAB52, very nice too, but i dont want to loose the renault standard setup, i.e. the remote and the display, so i will have to sell that before i get my clio. Thanks Stuart

I have got it coming mid september, and its coming with the standard radio with a 6 disk changer under the passenger seat. I want to change it to a cd changer thats playes CDRW disks with MP3's on. Any ideas? Many thanks

I am looking to buy one of the aforementioned car radios. My main concern however is installation. I would like an external aerial to recieve the DAB signal but I'm unsure what this entails. Ideally I would like to be able to remove my current aerial and just screw in a new one but from what I read this won't work. I would really prefer not to drill any holes into the bodywork. Any hints would be...

Can anyone recommend a good place to supply and fit an aftermarket Satnav system to my new car? Cheshire area. cheers.

I have the stereo working but i can get it fixed onto the bracket - the autoleads facia didnt come with any instructions - my stereo came with a crap bracket - i am not sure how to use the Autoleads one - i assume i can use either?? any tips? 1997 Fiesta.

New in the August Issue of On Sound and Music, the latest take on a Universal Player that just may be the best Single Box All Format Player today, the McCormack UDP-1. Take a look at http://www.onsoundandmusic.com/issues/0408/0408-UDP-1.html. Much more at On Sound and Music, mixing the best of the High End with the Best of Pro Sound http://www.onsoundandmusic.com.

Bit of a beginner question.... I've been looking for one of those 'under cupboard' CD-radio units for ages and just can't find one for sale in the UK. I thought the other day that it might be possible to fit a car CD player to the underside of a kitchen cupboard and place some speakers but I don't know if this is sensible. Any opinions? Do they require a separate amp or can I just wire them...

I would like to replace the factory fitted head unit in my Honda accord with an MP3 unit. I have actually done this already with a Kenwood unit but I have a) lost use of steering wheel audio control b) lost sound from my Nav-Sat system Could a new non-Honda unit rectify this? Is there now a standard connector for allowing connection of these fairly common interfaces?

If I am installing a DAB roof mounted aerial in my car do I have to replace the wiring and the bee sting section of the aerial or can I get away with just replacing the bee-sting section? Thanks Colin

Hi I have a Fiesta, it currently has its standard cassette player, i have a CD player that i wanna stick in... Main problem is that the standard space is like twice the size of a regular CD player, so i am guessing i will have a huge empty gap above/below the CD player when its in - someone told me there are cases you can buy to fill it up...any ideas? Also, a friend of mine says its not too...