At present I have the following installed in my car... Kenwood KDC 5080 CD Head Unit Kenwood KDC C717 10 Disk Changer Kenwood KFC 1028C 4" Co-ax's Kenwood KFC 6907 6 x 9's JBL 12" Sub (can't quite remember details, not important if you read on) Boschman V6 600 Watt 4 Channel Amp This is in my 99 Seicento Sporting...

Genesis Five Channel for sale, pic he http://www.furtive.pwp.blueyonder.co.uk/five_1_small.jpg Specs he http://www.genesis-ice.com/Home/Specifications/5_Channel_Spec/5_channel_spec ..html Retail is £750 last time I checked, so would like to see £400, but welcome

I have the latest Renault Clio and I was wondering if anyone could tell me how to install some neons in my boot. I have a small light in the boot of my car that switches on when my boot is opened. I took a normal set of neons and cut off the cigarette adapter to leave bare wires which I then usd to connect to the small light in my boot. It then blew my neons so can anyone tell me how I can...

Someone please help... I have four speakers in my car and want to amplify the signal to the rear speakers only. The obvious thing to do is get a two channel amplifier and simply connect it up. However, my Head Unit (JVC KD-SH99R) has a built in amp, and it states in the manual, if you connect the unit to an external amp, you should switch the built-in amp off. If I do this however,...

hi im looking to bye 2 reconings for my 12'' subs rockford fosgates rfr2212 dual 4ohm punch power dvc .ive looked everywere and cant find them. thank in advanced -- styianni ------------------------------------------------------------------------ Posted via RealCarAudio.com - The checkmate of the caraudio community. http://www.RealCarAudio.com

Postal Lottery: Turn $6 into $60,000 in 90 days, GUARANTEED I found this in a news group and decided to try it. A little while back, I was browsing through newsgroups, just like you are now and came across a message just like this that said you could make thousands of dollars within weeks with only an initial investment of $6.00!!! So I thought yeah right, this must be a scam!!! But like most...

I have 2 Cerwin Vega HED 15" SUB's in a bandpass box. 400 watts max but 800 together. I was wondering what would be a good or the best amp to use with this. I dont know how to measure the wattage and what amount you would need for it to be good and not be pushed too hard ya know. Thankz. LaRrY -- You make fun of what you are really afraid of... and thats us......

I was searching for some subs for sale online to get an idea of the price range. Now audio wanted 375 for one 15" 15W3. I was wondering what's the difference in the models and how the perform from each other. I'm asking because I havent found a place yet that has these subs and an amp working at the same time, and I cant listen to them for myself, i'm all bad luck at the moment. The subs are ....

I need to replace the two 6" subs in the rear door of my 98 Discovery. I don't want to start cutting the car to pieces for bigger ones. Any recommendations for 6" ? There is a small amp already in the door panel driving the two already there, not sure of spec though. Head unit is a Kenwood Z838W.

Does anyone know where I can buy this lead from, and an idea of price? (Fit a 1998 Discovery) It allows my CARK91 handsfree to output through the front speakers instead of the poxy speaker provided. Everywhere I look its not for sale individually, but "must be fitted by a qualified..." blah blah. Any help appreciated.

Kenwood 673R or Pioneer MEH-7300R (Both MDLP) Also after speaker set (5 1/4", 6 x 9") - pref. Infinity REF range Thanks

Hi guys...I am looking for fiberglass in the uk. I am sure there is somewhere but I was very dissapointed when I checked the B&Q site (www.diy.com) and I couldnt find any. Does anyone have any online shop that provides fiberglass resin etc? -- JohnFish ------------------------------------------------------------------------ Posted via RealCarAudio.com - The checkmate of the caraudio community.

Firstly Ill say I'm new to this, so go easy on me... I really need to get a 4 channel amp to get the most out of my speakers, but need a little help first. My current Head Unit JVC KD-SH99R (I think) only has 4 regular speaker outputs to connect straight to speakers. But, in the manual it says that the built-in amp in the head unit, can be switched off if you connect to an external amp. But I...

Hi everyone I'm a newbie in the world of audio production. I'm especially interested in digital audio and sound engineering. Can anyone recommend some good books or websites about the topic? Thanks in advance.

Any of u chaps know how or where i can find how to decode some philips radios i've got knocking around? there the ones vauxhall fitted. JInx

turn 6 bucks into 600 Posted by andy on August 28, 2003 at 22:30:11: Posted by Starbuck on August 02, 19102 at 15:43:07: READING THIS COULD CHANGE YOUR LIFE! I found this on a bulletin board and decided to try it. A little while back, I was browsing through newsgroups, just like you are now, and came across an article similar to this that said you

Hi, I am looking for the manual of the Sony Car-Radio XR-C5120 R. Is there someone out there who got it or knows how to get it? Thanks Daniel

The FAQ under http://home.t-online.de/home/Lauke/ is updated.

Looking to do some work on my Cobra compact alarm (i.e. the control electronics are built into the siren). It's a 7900 model or something like that, had no luck finding any info but if anyone has a wiring diagram for *any* Cobra alarm I'd be grateful to see it as I reckon some of the wire colours etc might correspond to mine. PS It has a single 24-pin connector on which 21 pins are used. Cheers.

Question for you.... Is my thinking right here? A particular sub needs a box which is 1.25 cubic feet. Therefore this is 3375 cubic inches. The easiest way to do this is a box 15"x15"x15" (not allowing for the thickness of the wood) BUT....